Standing seam and ribbed panel metal roofs for homes, cabins, barns and shops. Free estimates and financing options available. Licensed and insured.
Metal roofing is a roof made of steel panels that lock or fasten together over your home's decking and underlayment. Afford-A-Pro General Construction and Roofing LLC installs standing seam and ribbed panel metal roofs for homeowners in Jasper, TN, and across the Sequatchie Valley, and we have been roofing here for 15+ years.
The weather in the Tennessee Valley is hard on a roof. Spring storms bring high wind and hail, summers are hot and humid, and winter freeze-thaw cycles work at every weak spot in the flashing. Metal sheds heavy rain fast, stands up to strong wind, and does not curl, crack or lose granules the way aging shingles do.
A properly installed metal roof can last 50 years or more, compared to 15 to 20 years for standard asphalt shingles. That long life, with very little upkeep, is the main reason so many homeowners in the valley choose metal when it is time for a new roof.
Standing seam metal roofing uses long panels that join at raised seams running from the ridge to the eave. The fasteners sit under the panel, out of the weather, so nothing pierces the face of the roof. Standing seam steel roofing gives a clean, modern look and is the most durable residential metal system we install.
Ribbed metal panel, also called exposed fastener panel, is screwed through the face of the panel into the deck or purlins. It costs less than standing seam and goes on faster. The tradeoff is that the screws and their rubber washers age over time and should be checked and tightened during routine maintenance.
Both systems shed rain and leaves well and handle Tennessee storms. Standing seam is the usual pick for a home where looks and the longest life matter most, while panel metal roofing is a practical, sturdy choice for ranch houses, cabins, garages, barns and shops. We install both and will show you each one at your estimate.
One of the first questions homeowners ask is whether a metal roof can go right over their existing shingles. Sometimes it can, but the answer depends on how many layers are already on the house, the condition of the decking underneath and what the local building code allows.
We assess the decking at your free inspection. If the boards are soft, rotted or water damaged, or if there are already multiple layers of shingles, a full tear-off is the right approach, and any damaged decking is replaced before the new metal goes on. If you are weighing a full replacement, our roof replacement page explains how a tear-off works from start to finish.
If your current roof only has a small problem and is not ready to be replaced yet, a targeted roof repair may buy you more time. We will tell you honestly which option makes sense.
Metal roofing comes in a wide range of colors, from classic charcoal, dark bronze and barn red to lighter tans, whites and bright blues. A painted finish protects the steel and holds its color for years, and lighter colors reflect more of the summer sun.
Most homeowners choose a color that matches their brick, siding or trim, or that fits the look of the neighborhood.
Lifespan is the strongest case for metal. A properly installed metal roof can last 50 years or more, compared to 15 to 20 years for standard asphalt shingles. Standing seam systems, with their concealed fasteners, have a lifespan of 40 to 70 years.
Installation quality decides whether a roof reaches that range. Correct underlayment, flashing at every chimney, vent and valley, and properly sealed fasteners keep water out for the life of the panels. For many homeowners, a metal roof is the last roof they will ever need to buy.
Noise. A metal roof installed over solid decking and underlayment, with an insulated attic below, is usually not much louder in the rain than a shingle roof. Metal over open framing, such as a barn or carport, is louder because nothing sits between the panels and the space below.
Heat. Metal does not make a house hotter. It reflects much of the sun instead of soaking it up the way dark shingles do, and it cools quickly after sundown. Lighter colors and reflective coatings offer potential energy savings in a Tennessee summer.
Hail. Steel panels resist the punctures and granule loss that hail causes on shingles. Very large hail can still dent metal, especially softer or thinner panels, so we talk through panel options with you if hail is a concern at your home.
Request a Free Estimate
Metal works on almost any building. On homes, we install standing seam and ribbed panel roofs on brick ranches, farmhouses, older frame houses and manufactured homes. Mountain cabins and lake homes are a natural fit because metal sheds leaves, pine needles and heavy rain with ease.
We also install and repair metal panel roofing on barns, equipment sheds, garages and shops, where durable metal earns its keep. For businesses, our commercial roofing team handles metal panel roofs, metal buildings, flat roof systems and re-roofing, with the scope and options laid out in writing.
Every metal roof estimate comes from the same handful of factors. The size of the roof sets how much material and labor the job needs, and a steep pitch takes more time and safety equipment than a low one.
The panel system is the next big factor. Standing seam costs more than ribbed panel because of the panel itself and the extra labor of a concealed-fastener install. Panel thickness, the color and finish you choose, and the amount of trim and flashing around chimneys, skylights, valleys and dormers all play a part.
Whether the old roof has to come off matters too. A tear-off adds labor and disposal, and any rotted decking found underneath must be replaced before the metal goes on. Access to the house and the required building permits round out the list.
The way to know your number is a free estimate. We inspect the roof and give you a written quote with transparent pricing and no hidden fees, and financing options are available.
Our home base is Jasper, TN, and we install metal roofs throughout Marion County and the Sequatchie Valley. We also serve homeowners in Chattanooga, from the hillside homes on Lookout and Signal Mountain to the older houses in the city's established neighborhoods.
To the west, we travel to Winchester and the Tims Ford Lake area. In North Alabama, we serve Scottsboro and Huntsville, where spring hail and severe storms make a durable roof worth the investment. Call (256) 608-5311 to set up a free inspection wherever you are.
Common questions from homeowners considering a metal roof.
A properly installed metal roof can last 50 years or more, compared to 15 to 20 years for standard asphalt shingles. Standing seam systems, with their concealed fasteners, have a lifespan of 40 to 70 years. How long yours lasts depends on the panel type, the quality of the installation and how well the flashing and fasteners are maintained.
On a home, usually not by much. When metal is installed over solid decking and underlayment, with an insulated attic below, most homeowners find rain sounds similar to a shingle roof. Metal over open framing, like a barn or a carport, is louder because nothing sits between the panels and the space below.
Sometimes. Whether metal can go over an existing shingle roof depends on how many layers are already there, the condition of the decking underneath and the local building code. We check the decking and the existing layers at your free inspection and tell you honestly whether an overlay or a full tear-off is the right call for your roof.
Standing seam panels join at raised seams and are fastened underneath, so no screws pass through the face of the panel. Exposed fastener, or ribbed panel, roofing is screwed through the face, and those screws and washers need checking over the years. Standing seam costs more and suits homes that want a clean, modern look; ribbed panel is a durable, lower-cost choice for cabins, barns, shops and many homes.
No. Metal reflects much of the sun instead of soaking it up the way dark shingles do, and it gives off heat quickly once the sun goes down. Lighter colors and reflective coatings can help keep the attic cooler in a Tennessee summer, with potential energy savings. Attic ventilation and insulation matter as much as the roof itself.
For many homeowners who plan to stay put, yes. Metal costs more to install than asphalt shingles, but it lasts far longer, needs little upkeep and stands up well to wind and heavy rain. If you expect to sell in a few years, shingles may make more sense. Your free estimate can include both options so you can compare them side by side, and financing options are available.
"They did a great job replacing the shingles on our roof. I highly recommend them and will use them again in the future."
"Michael and his staff replaced our roof with metal roofing. The company was timely and efficient. They did a great job and cleaned up after they were done. We are very satisfied."
"Very professional, as well as courteous in his conduct. 5 star roof decking replacement and metal roof installation. As a retired contractor I would highly recommend him for your roofing needs."
"Michael installed our metal roof. Was very professional. Did a very good job. Had one little issue that was addressed immediately. Would definitely recommend."
"10/10 service could never recommend this company enough! Michael is always punctual and perfectly providing the best job around!"
"Excellent job. Very polite. Cleaned up the material afterwards and the craftsmanship on my particularly difficult area of my roof is beautiful. Definitely satisfied. 10/10"
"He was professional and did excellent work and done in timely fashion. Did great clean up! Would recommend him highly and would hire him again."
"Thank you Michael for going above and beyond. He will be my roofer to do it right."
"Michael did a great job on our porches and metal roof. Very meticulous and professional. Would definitely recommend."
